LBL Lighting Dia User Manual
Dia and mini-dia pendant, Assemble the fixture
Installation Instructions for
1
Dia and Mini-Dia Pendant
980FSJDIA
G
P
I
:
ENERAL
RODUCT NFORMATION
This product is ETL listed and suitable only for indoor dry locations
and approved for use at any height above the finished floor.
Fusion Jack
™
1.0
HS783_
SOCKET
LAMP
1A
NOTE:
Use only your fingers to install the lamp.
Push the lamp pins completely into the socket holes.
Use
Type Xelogen
MAX 50 Watt
(Xenon) Bi-Pin Lamp.
1
CAUTION: RISK OF FIRE
Never replace a Xenon lamp with a regular Halogen lamp.
A Halogen lamp requires a protective glass shield.
Assemble the Fixture
Place the hardware inside the glass shade and install the
four mounting rods by screwing them in completely.
2
2
MOUNTING ROD
GLASS
SHADE
1B
NOTE:To replace the lamp, reverse section 1.
HS782_
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.