LBL Lighting Mademoiselle No. 2 User Manual
Mademoiselle no.1 and no.2 pendant, Assemble the fixture
Installation Instructions for
1
Mademoiselle No.1 and No.2 Pendant
980FSJMADEM
GENERAL PRODUCT INFORMATION:
This product is ETL listed and suitable only for indoor dry locations
and approved for use at any height above the finished floor.
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
Fusion Jack™
1.1
HS686_1A_
SOCKET
LAMP
1A
NOTE:
Use only your fingers to install the lamp.
Push the lamp pins completely into the socket holes.
Tighten the bottom two set screws with the provided Allen
wrench.
1
Assemble the Fixture
Thread the cable through the center of the crystal web
and drape it over the socket and lamp; postion it until
desired look is acquired.
2
1B
3
GLASS
SHADE
NOTE: For Mademoiselle no. 2, repeat the step
above with the second layer of crystal web.
HS678_1A_
Use
MAX 50 Watt
MR16 Front Cover
Halogen Lamp.
ALLEN
WRENCH
2
1
2