LBL Lighting Mini-Someday User Manual
Mini-someday pendant (led), Adjust the fixture height, Install the shade
1
G
P
I
:
ENERAL
RODUCT NFORMATION
This product is ETL listed and suitable only for indoor dry locations
and approved for use at any height above the finished floor.
This instruction shows a typical installation.
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
Fusion Jack
™
Installation Instructions for
Mini-Someday Pendant (LED)
980FSJMSOMDD
1.0
HS749_LED
Adjust the Fixture Height
1
1A
GLASS SHADE
Install the Shade
FIXTURE FRAME
Slip the cord through the glass shade and gently lower the glass
shade onto the
.
fixture frame
1
SET SCREW
Back out (do not remove) the set screw on tip of the
connector with the provided Allen wrench.
ALLEN WRENCH
3
Back out (do not remove) the set screw on the conical
connector with the provided Allen wrench.
SET SCREW
ALLEN WRENCH
4
2B
2C
4
3
CONNECTOR