LBL Lighting Mini-Rhythm D - Manual

1B
Installation Instructions for
1
Mini-Rhythm Pendant (LED)
980FSJMRYTHD
G P I : ENERAL RODUCT NFORMATION
This product is ETL listed and suitable only for indoor dry locations
and approved for use at any height above the finished floor.
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
Fusion Jack
™
1.1
HS762_LED
SOCKET
1A
NOTE: Use only your fingers to install the lamp.
Screw the lamp into the socket. 1
Assemble the Fixture
Place the hardware inside the glass shade and install the
three mounting rods by screwing them in completely. 2 2
MOUNTING ROD MOUNTING ROD
GLASS
SHADE
The lamp is rated at 6 watts at 12 volts.
LAMP