LBL Lighting Springview - Manual

Installation Instructions for
1
Springview Pendant
980FSJSPRNGV
G P I : ENERAL RODUCT NFORMATION
This product is ETL listed and suitable only for indoor dry locations
and approved for use at any height above the finished floor.
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
Fusion Jack
™
1.1
HS603_
SOCKET
1A
NOTE: Use only your fingers to install the lamp.
Push the lamp pins completely into the socket holes. 1
Assemble the Fixture
Use MR16 Front Cover MAX 50 Watt
Halogen Lamp.
Place the hardware inside the glass shade and install the
three mounting rods by screwing them in completely. 2
1B
2
MOUNTING ROD MOUNTING ROD
GLASS
SHADE
LAMP