LBL Lighting Tubular P - Manual

SOCKET
ASSEMBLY
THUMB
SCREW
LAMP
SOCKET
Use Watt,Type Xelogen MAX 35
(Xenon) Bi-Pin Lamp.
Installation Instructions for
Tubular
980FSJTBLRP
1
Install the Lamp & Shade
Push the lamp pins completely into the socket holes.
Place the glass shade completely over the socket assembly.
Align the glass shade holes with the socket assembly holes and
tighten the three thumb screws to secure the glass shade
in place.
NOTE: Do not over tighten the thumb screw which may
cause the glass shade to break.
NOTE: To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
NOTE: Use only your fingers and soft cloth to replace
the lamp.
GLASS
SHADE
THUMB
SCREW
SOCKET ASSEMBLY
WARNING: RISK OF FIRE
Never replace a Xenon (Xelogen) lamp with a regular
Halogen lamp.A regular Halogen lamp requires a protective
glass shield.
Remove the three thumb screws from the socket assembly.
G P I : ENERAL RODUCT NFORMATION
This product is ETL listed and suitable only for indoor dry locations
and approved for use at any height above the finished floor.
Fusion Jack
™
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
1
2
4
3
1A 1A
1
2
3
4
1.3 HS279_