LBL Lighting Tear-SII Coax PCF User Manual
Tear-sii compact fluorescent, Install the fixture
Installation Instructions for
Tear-SII Compact Fluorescent
1.0
PF242_1BMPT
980TEARSIISPCF
Install the Fixture
1
G
P
I
:
ENERAL RODUCT NFORMATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for damp locations.
Mount the crossbar to the electrical box with the two #8-32
screws.
CROSSBAR
#8-32 SCREW
Insert the cord through the glass shade hole.
Carefully slide the glass shade down until it sits properly on
the socket assembly.
CORD
GLASS SHADE
SOCKET ASSEMBLY
Suspension
1A
11
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1B
3
2
2
3
2
1
1