LBL Lighting Mini-Veneto P - Manual

G P I : ENERAL RODUCT NFORMATION
This product is ETL listed and suitable only for indoor dry locations
and approved for use at any height above the finished floor.
Fusion Jack
™
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
Installation Instructions for
Mini-Veneto 1.3 HS379_
980FSJMVNTP
Install Lamp and Shade
1
FIXTURE HOOKED WIRE
GLASS SHADE
Line up the fixture hooked wires with the glass shade holes.
Insert the fixture hooked wires into the glass shade holes.
Insert each hooked wire into one support post slot.
Carefully, lift the socket assembly up to guide the support posts
into the glass holes. This will secure the glass in place.
FIXTURE
HOOKED
WIRE
SOCKET ASSEMBLY
SUPPORT POST
1A
1
1B
3
2
4
1
3
2
3
2
4