LBL Lighting Twin Tube Chandelier - Manual

Installation Instructions for
Tube Twin Chandelier Head 1.4 HTWTBFRSC1BFSJ
980FSJTUBTCH
Install the Lamp
1
Unscrew and remove the thumb screws and plastic washers
from the socket housing.
NOTE: To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
SOCKET HOUSING
THUMB SCREW
Install each lamp by pushing the lamp pins completely into the
socket holes.
LAMP
LAMP PIN
NOTE: Use only your fingers and soft cloth to replace
the lamp.
Use Watt,Type Xelogen MAX 10
(Xenon) Bi-Pin Lamp With Each Socket.
SOCKET
PLASTIC
WASHER
G P I : ENERAL RODUCT NFORMATION
This product is ETL listed and suitable only for indoor dry locations
and approved for use at any height above the finished floor.
WARNING: RISK OF FIRE
Never replace a Xenon (Xelogen) lamp with a regular
Halogen lamp.A regular Halogen lamp requires a protective
glass shield.
Fusion Jack
Fusion Jack
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1A
1
1B
1
2
1
2 2