LBL Lighting Siena - Manual

1A
1B
1
Installation Instructions for
Siena Wall
950WSSIENA
Install the Mounting Plate
G P I : ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product can mount either to a 4” square electrical box with a
round plaster ring or an octagon electrical box.
This instruction shows a typical installation.
Unscrew and remove the 2 mounting plate screws.
Remove the mounting plate from the fixture base.
MOUNTING
PLATE
MOUNTING
PLATE
SCEW
Attach the mounting plate to the electrical box using
the two #8-32 screws provided.
MOUNTING
PLATE
#8-32 SCREW
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1.0
C 003_ W
1A
1A
1 1
2
1
3
3
3