LBL Lighting Ensu LED - Manual

1A
1B
Installation Instructions for
Ensu Wall
1
950ENSU
G P I : ENERAL RODUCT NFORMATION
Mount to either a 4" square electrical box with
round plaster ring or an octagonal electrical box.
Suitable for damp locations.
Install the Wall Canopy
With the Allen wrench provided, remove the two fixture
screws from the top and base of the fixture.
Remove the mounting plate from the back of the
fixture.
ALLEN WRENCH
FIXTURE SCREW
MOUNTING
PLATE
Secure the mounting plate to the electrical box with the
provided #8-32 screws .
#8-32 SCREW
MOUNTING
PLATE
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1.0
C 002_ W
1A
1A
2
1
1
1
3 3