LBL Lighting Hanna User Manual
Hanna wall (led), Install the mounting plate
1
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
Install the Mounting Plate
G
P
I
:
ENERAL
RODUCT NFORMATION
This product is suitable for damp locations.
This product can mount either to a 4” square electrical box with a
round plaster ring or an octagon electrical box.
This product may be dimmed with a low-voltage electronic dimmer.
This instruction shows a typical installation.
Wall
1A
MOUNTING
PLATE SCREW
Installation Instructions for
Hanna Wall (LED)
980HANNAWD
1.0
W 822_
S
1
1
2
Install the mounting plate onto the electrical box with
the two #8-32 screws provided.
Remove the two mounting plate screws.
Remove the mounting plate from the back of the
fixture.
1
2
2
3
1B
3
MOUNTING
PLATE
1
MOUNTING
PLATE
#8-32 SCREW
3
3