LBL Lighting Mini-Rock Candy Cylinder Wall - Manual

1
Installation Instructions for
Mini-Rock Candy Cylinder Wall (Compact Fluorescent)
980MROCKCWCF
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
Install the Fixture
GENERAL PRODUCT INFORMATION:
This product is suitable for damp locations.
This product can mount either to a 4” square electrical box with a
round plaster ring or an octagon electrical box.
This instruction shows a typical instruction.
With the Allen wrench provided, back out (do not fully
remove) the set screws at the base of the fixture.
Remove the mounting plate from the back of the
fixture.
1
1.0
WALL
1A
2
PW623_CF
ALLEN WRENCH
SET SCREW
1
1B
6 3
6 4
Connect the mounting plate ground wire to a suitable
ground in accordance to local electrical codes.
Connect the white ballast wire to the neutral power line
wire with a wire nut.
Connect the black ballast wire to the hot power line
wire with a wire nut. 6 5
5 4
3
MOUNTING
PLATE
BALLAST