LBL Lighting Omni w/Cover Small - Manual

Installation Instructions for
Small Omni 1.1 JW559
980OMNISW
G P I : ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product can be dimmed with a standard incandescent dimmer.
Feed the fixture wires through the mounting plate side hole.
Connect the ground wire to a suitable ground in accordance
with local electrical codes.
Connect the white wire to the neutral power line wire.
Connect the black wire to the hot power line wire.
1
MOUNTING PLATE
Install the Fixture
Mount the crossbar assembly to the electrical box holes with
the two #8-32 screws provided.
CROSSBAR
ASSEMBLY
ELECTRICAL BOX HOLE
#8-32 SCREW
Assemble the crossbar by screwing the crossbar nipple to the
cross bar and secure it by tightening the nut.
CROSSBAR
ASSEMBLY CROSSBAR
NIPPLE NUT
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1
1A
2
3
1C
1B
4
5
Wall
6
2
5
2
6