LBL Lighting Pavia WCF - Manual

1
Installation Instructions for
Pavia (Compact Fluorescent) 1.0 PW484_2D60
980PAVIAWCF
G P I : ENERAL RODUCT NFORMATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for damp locations.
Install the Fixture
Place the ballast, all wires and wire nut connections properly
inside the electrical box.
Align the mounting plate holes with electrical box holes and
tighten with two #8-32 screws to secure the fixture in place.
1
MOUNTING
PLATE
ELECTRICAL
BOX HOLE
#8-32 SCREW
Connect the braided copper wire to a suitable ground in
accordance with local electrical codes.
Connect the white ballast wire to the neutral power line wire
with a wire nut.
Connect the black ballast wire to the hot power line wire with
a wire nut.
1A 1B
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Wall
1 4
5
2
2
3
5 5
3
1