LBL Lighting Kett User Manual
Kett wall, Install the mounting plate
1
Installation Instructions for
Kett Wall
980KETTW
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
Install the Mounting Plate
GENERAL PRODUCT INFORMATION:
This product is suitable for damp locations.
This product can mount either to a 4” square electrical box with a
round plaster ring or an octagon electrical box.
This product can be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Remove the screw located on top of the fixture base.
Remove the mounting plate by rotating it out and away
from the mounting stud.
Wall
1.0
HW6691_2G
1
2
MOUNTING
PLATE
MOUNTING SCREW
1A
1B
1
MOUNTING
STUD