LBL Lighting Oliver - Manual

1
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
Install the Mounting Plate
GENERAL PRODUCT INFORMATION:
This product is suitable for damp locations.
This product can mount either to a 4” square electrical box with a
round plaster ring or an octagon electrical box.
This product can be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Wall
Remove the screw located on top of the fixture base. Remove the mounting plate by rotating it out and away
from the mounting stud.
MOUNTING
PLATE
MOUNTING SCREW
1A 1B
1 2
1
MOUNTING
STUD
Installation Instructions for
Oliver Wall
980OLVRW
1.0
HW6681_2G