LBL Lighting Casino One - Manual

1
Installation Instructions for
Casino Wall 1.5 HW310_2G60
980CASIN1W
G P I : ENERAL RODUCT NFORMATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for damp locations.
This product can be dimmed with a standard incandescent dimmer.
Install the Fixture
Remove the two #8-32 Phillips head screws on side of the
canopy.
Remove the crossbar assembly.
CROSSBAR
ASSEMBLY
CANOPY
#8-32 SCREW
1A 1B
Mount the crossbar assembly to the electrical box holes with
the two #8-32 screws provided.
FRONT
CROSSBAR
ELECTRICAL BOX HOLE
NOTE: To mount the crossbar assembly, use the front
crossbar, with the electrical box containing a plaster ring,
or use the rear crossbar, with the octagon electrical box.
REAR CROSSBAR
#8-32 SCREW
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Wall
1
2
3
2
1
3
3
1