LBL Lighting Icicle - Manual

1
Installation Instructions for
Icicle Wall 1.4 HW277_SC2G60
980ICICLW
G P I : ENERAL RODUCT NFORMATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for damp locations.
This product can be dimmed with a standard incandescent dimmer.
1B 1A
M3 SET SCREW
1.5MM ALLEN WRENCH
BACKPLATE
CANOPY
Loosen the two M3 set screws on side of (Do Not Remove)
the canopy with the 1.5MM Allen wrench provided.
Remove the backplate.
Line up two backplate holes with the electrical box holes.
Mount the backplate to the electrical box with the two #8-32
screws provided.
#8-32 SCREW
BACKPLATE
ELECTRICAL BOX HOLE
1
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Wall
1
2
3
3
4
1
4
2
4
Install the Fixture