LBL Lighting Max - Manual

1
Installation Instructions for
Max Wall 1.4 HW170_2G60
980MAXW
G P I : ENERAL RODUCT NFORMATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for damp locations.
This product can be dimmed with a standard incandescent dimmer.
Install the Fixture
BACKPLATE
Loosen the two M3 set screws on side of (Do Not Remove)
the canopy with the 1.5MM Allen wrench provided.
Remove the backplate.
Line up two backplate holes with the electrical box holes.
Mount the backplate to the electrical box with the two #8-32
screws provided.
CANOPY
M3 SET SCREW
1.5MM ALLEN WRENCH
BACKPLATE
ELECTRICAL BOX HOLE
#8-32 SCREW
1A 1B
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Wall
1
2
3
1
2
4
3
4
4