LBL Lighting Eclipse W - Manual

1
Installation Instructions for
Eclipse 1.2 JW612_360
980ECLIPW
G P I : ENERAL RODUCT NFORMATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for damp locations.
This product can be dimmed with a standard incandescent dimmer.
Install the Fixture
Thread the two provided #8-32 screws (Not Completely)
into the electrical box holes, leaving 1/8" of them exposed.
ELECTRICAL BOX HOLE
#8-32 SCREW
1/8"
In accordance with local electrical codes, make sure that the
fixture is grounded.
Connect the fixture white wire to the neutral power line wire
with a wire nut.
Connect the fixture black wire to the hot power line wire with
a wire nut.
MOUNTING
PLATE
1A 1B
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Wall
1
2
4
3
4
1
3
1