LBL Lighting Sophia - Manual

1
Installation Instructions for
Sophia Wall
1.5 HW266_SC2G60
980SOPHIW
G P I : ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product can be dimmed with a standard incandescent dimmer.
Install the Fixture
1A 1B
Loosen the two M3 set screws on side of
(Do Not Remove)
the canopy with the 1.6MM Allen wrench provided.
Remove the backplate.
M3 SET SCREW
1.6MM ALLEN WRENCH
BACKPLATE
CANOPY Line up two backplate holes with the electrical box holes.
Mount the backplate to the electrical box with the two #8-32
screws provided.
BACKPLATE
ELECTRICAL BOX HOLE
#8-32 SCREW
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Wall
1
2
3
1
2
4
3
4
4