LBL Lighting Zanz 3-Light - Manual

CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
G P I : ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product can mount either to a 4” square electrical box with a
round plaster ring or an octagon electrical box.
This product can be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Wall
Installation Instructions for
Zanz 3-Light Bath
980ZANZ3W
1.0
BA7533_
1
Install the Mounting Plate
Remove the two set screws located on bottom of the
fixture base.
Remove the mounting plate by sliding it away from the
mounting studs then out of the fixture.
Attach the mounting plate to the electrical box using
the two #8-32 screws provided.
MOUNTING STUD
MOUNTING
PLATE
SET SCREW
1
1A
2
3
1 1
2 2
TOP VIEW
2
MOUNTING
PLATE
#8-32 SCREW
1B
3
3