LBL Lighting Upstate 28 User Manual
Upstate 28 outdoor, Install the fixture
1
Installation Instructions for
Install the Fixture
G
P
I
:
ENERAL
RODUCT NFORMATION
This product is suitable for wet locations.
This product can mount either to a 4” square electrical box with a
round plaster ring or an octagon electrical box.
This product may be dimmed with a low-voltage electronic dimmer.
With the Allen wrench provided remove the four
mounting plate screws.
Remove the mounting plate from the back of the
fixture.
Attach the mounting plate to the electrical box using
the two #8-32 screws provided.
MOUNTING
PLATE
1
3
Outdoor
1A
1B
2
MOUNTING
PLATE
ALLEN WRENCH
Upstate 28 Outdoor
980UPSTA28O
1.0
OD791_LED
MOUNTING
PLATE
SCREW
1
1
1
1
#8-32 SCREW
3
3
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.