LBL Lighting Modular New York Medium/Large T8 with Emergency Backup User Manual
Install the fixture base
Installation Instructions for
Modular Medium and Large (T8 Fluorescent)
with Emergency Backup
1.0
PW5_17L1HBW,
PW5_25L1HBW
980MODUMLT8-EM
G
P
I
:
ENERAL
RODUCT NFORMATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for wet locations.
Install the Fixture Base
1
Remove all the cap screws around the perimeter of the cover.
Pull the cover off of the housing.
Remove the six Phillips-head screws on the reflector.
Lift the reflector out of the housing.
Outdoor
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1A
1B
1
3
2
4
1
1
3
3
1
1
1
1
3
3
3
3