LBL Lighting Modular Industrial Small User Manual
Modular small, Install the fixture base
Installation Instructions for
Modular Small
1.0
JW119_, JW115_
JW120_,
980MODUS
G
P
I
:
ENERAL
RODUCT NFORMATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for wet locations.
This product may be dimmed using a standard incandescent
dimmer.
1
Install the Fixture Base
Remove all the cap screws around the perimeter of the cover.
Pull the cover off of the housing.
Remove the four Phillips-head screws on the reflector.
Lift the reflector out of the housing.
Outdoor
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1A
1B
1
3
1
2
4
1
1
1
3
3
3
3