LBL Lighting Omni Small LED User Manual
Small omni (led), Prepare the fixture for installation
Outdoor
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1B
1A
1
2
3
4
Installation Instructions for
Small Omni (LED)
1.0
LW583, LW559
980OMNISWO-D
G
P
I
:
ENERAL
RODUCT NFORMATION
This product is suitable for wet locations.
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
Power consumption is rated at 10 watts.
This product can be dimmed with a low-voltage electronic dimmer.
1
Remove the six cap screws around the perimeter of the cover.
Lift the cover off the fixture body.
Prepare the Fixture for Installation
Remove the four screws on the reflector.
Lift the reflector out of the fixture body.
1
1
1
1
1
1
3
3
3
3