LBL Lighting Raven 12 - Manual

1
Installation Instructions for
Raven 12 Outdoor
980RAVN12O
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
Install the Fixture
G P I : ENERAL RODUCT NFORMATION
This product is suitable for wet locations.
This product can mount either to a 4” square electrical box with a
round plaster ring or an octagon electrical box.
This instruction shows a typical installation.
With the Allen wrench provided, back out (do not fully
remove) the set screws at the bottom of the fixture.
Remove the mounting plate from the back of the
fixture.
Attach the mounting plate to the electrical box using
the two #8-32 screws provided.
MOUNTING
PLATE
#8-32 SCREW
1
3
1.0
Outdoor
1A 1B
2
OD745_LED
3
3
MOUNTING
PLATE
ALLEN WRENCH
SET SCREW
1
1
Note: When installing the mounting plate to the
electrical box, be sure to have the cutout right side
up.
CUTOUT