LBL Lighting Polo - Manual

1
Installation Instructions for
Polo
1.0 7701, 7699
980POLOO
Install the Fixture
G P I : ENERAL RODUCT NFORMATION
This product is suitable for wet locations.
This product can be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Attach the crossbar to the electrical box using two #8-32
screws provided.
Connect the crossbar to a suitable ground according to local
electrical codes.
Feed the power line wires through the crossbar nipple.
NIPPLE
POWER LINE
WIRE
NIPPLE
#8-32 SCREW
CROSSBAR
3
Outdoor
1B 1A
1 2
1
2
2
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
3