LBL Lighting Clipper/G User Manual
Clipper/g, Install the fixture
1
Installation Instructions for
Clipper/G
1.2
6950_
980CLIPGW
Install the Fixture
G
P
I
:
ENERAL
RODUCT NFORMATION
This product is suitable for outdoor and wet locations.
This product can be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
#8-32 SCREW
The fixture base must be grounded in accordance with local
electrical code.
Feed the power line wires through the nipple of the mounting
plate assembly.
Line up two mounting plate holes with the two electrical box
holes and mount the mounting plate assembly to the electrical
box with the two #8-32 screws provided.
For wet location installation, caulk around the mounting
plate with waterproof construction sealant.
MOUNTING PLATE ASSEMBLY
Outdoor
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1B
1A
1
4
2
2
3
3
3