LBL Lighting Eclipse - Manual

1
Installation Instructions for
Eclipse Wet PW612_240_W
980ECLIPWW
GENERAL PRODUCT INFORMATION:
This product is suitable for outdoor and wet locations.
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product can be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Disassemble the Fixture
While holding the mounting plate assembly in place, rotate the
metal shade counter clockwise to remove it.
METAL SHADE
EXPOSED
THREADED NIPPLE
4
While holding the mounting plate, completely remove the
assembly cover by pulling it off the threaded nipple.
Outdoor
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
1.1
1A 1B
1 1 1 2
1