LBL Lighting Fusion Jack Canopy 12.75" 3 Light Round LED User Manual
3 port round fusion jack canopy, Install the 3 round fusion jack canopy, Fusion jack
Fusion Jack
1
Installation Instructions for
3 Port Round Fusion Jack Canopy
1.0
CK003B-FJ_
980FSJ3PRC
Install the 3 Round Fusion Jack Canopy
G
P
I
:
ENERAL
RODUCT NFORMATION
This product is suitable for indoor dry locations only.
This product can be dimmed with a standard incandescent dimmer.
Remove the three #8-32 screws on the canopy housing.
Lift the mounting plate from the housing.
#8-32 SCREW
CANOPY HOUSING
MOUNTING PLATE
MOUNTING PLATE
Align the mounting plate slots with the electrical box holes and
mark four points onto the ceiling through the mounting holes.
With a hammer tap the anchors at the marked points into the
ceiling up to the threaded portion.
Screw the anchors in the rest of the way with a Phillips
screwdriver.
ANCHOR
MOUNTING PLATE
Feed the power line wires through the mounting plate
center hole.
Line up the two mounting plate slots with the electrical box
holes and use the two provided #8-32 screws to mount it to
the electrical box.
#8-32 SCREW
1A
1C
1B
1
1D
2
3
4
5
6
7
3
1
1
4
5
3
3
3
7
7
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.