LBL Lighting Fusion Jack Canopy 4" Round Dome LED - Manual

1
Installation Instructions for
Fusion Jack 4" Round Dome Canopy
980FSJDMC
Install the 4" Round Dome Canopy
GENERAL PRODUCT INFORMATION:
This product is suitable for indoor dry locations only.
This product can be dimmed with a standard incandescent dimmer.
LED versions are dimmable with a low-voltage electronic dimmer.
Minimum volume of the electrical box must be 6 cubic inches (98
cubic centimeters).
Loosen the two flat head screws to remove the crossbar from
the dome canopy.
CROSSBAR
FLAT HEAD
SCREW
DOME
CANOPY
Mount the crossbar to the electrical box with the two #8-32
screws.
CROSSBAR
#8-32 SCREW
1A 1B
C AUTION — RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and DISCONNECT POWER TO THE
ELECTRICAL BOX.
1 1 1 2
Fusion Jack™
1.4 CK001B-FJ-_ 1.4
1 1
2 2