LBL Lighting MO 4" Round Direct Feed Dual Feed Canopy User Manual
4" round single-post direct power feed canopy, Install the power feed canopy
Installation Instructions for
4" Round Single-Post Direct Power Feed Canopy
980MRL4RDSPFC
1
1.2
REMOTECNPYDIR_
Install the Power Feed Canopy
G
P
I
:
ENERAL
RODUCT NFORMATION
This product is suitable for indoor dry locations only.
Minimum volume of the electrical box must be 6 cubic inches (98
cubic centimeter).
NOTE:
The low voltage wires should be present in the
electrical box prior to these steps. Refer to the instructions
provided with the remote transformer to install the remote
transformer and low voltage wires.
CANOPY
Connect each power feed canopy wire to one low voltage with
a wire nut.
NOTE:
Use the provided universal round crossbar when
the canopy holes do not line up with the electrical box
holes.
Place all wires and wire nut connections inside the electrical
box.
Tighten the two provided #8-32 flat head screws to the
electrical box holes with the 3/32 Allen wrench to secure the
canopy in place.
#8-32 FLAT
HEAD SCREW
3/32 ALLEN WRENCH
Monorail
1A
1A
1
2
3
3
1
1
3
1A
1B