Avenview FAIL-SAFE VR 2000 - Manual (Page 7)

www.avenview.com 7
1.7 Panel Description
FRONT PANEL (Transmitter, VGA-C5ARS-S)
REAR PANEL (Transmitter, VGA-C5ARS-S)
1. 5V DC Power Jack 2. VGA OUT: Local VGA OUT
3. CAT-5 OUT: CAT5/CAT6 cable for
extending the signal
4. S/PDIF: Local digital stereo audio
5. STEREO: Local analog stereo audio 6.
1. IR TRANSMITTER: Connect to IR
Transmitter for IR Pass-Through from
VGA-C5-ARS-R to VGA-C5ARS-S
2. RS-232: Connect to a RS-232 signal
source or receiver
3. STEREO IN: Connect to analog audio
source
4. S/PDIF IN: Connect to digital audio
source
5. AUDIO SELECT: Select between
S/PDIF and STEREO
6. VGA IN: Connect to a VGA input source
7. IR INPUT: Connect to IR Receiver for
IR Pass-Through from VGA-C5-ARS-S
to VGA-C5ARS-R