Nikon 5700 - Manual (Page 34)

Taking and Reviewing Pictur
es—Basic Pictur
e T
aking
22
Basic Picture Taking
This section details the steps for taking pictures in the automatic “point and
shoot” mode, User Set A. When you first use the camera, it will be set to User
Set A by default.
Step 1—Ready the Camera
Before using your camera, complete the following steps:
1 .1 Remove the lens cap
Remove the lens cap by pressing the tabs on
either side of the cap.
1 .4 Turn the camera on
A beep will sound and the lens will extend. After a
short pause, current settings will be displayed in the
control panel and the monitor or viewfinder; the
monitor or viewfinder will show the view through the
lens.
1 .3 Slide the mode selector to (shooting mode)
1 .2 Open the monitor as shown in (1) through (5)