A95) is au, F function, A95) – Nikon S6300 User Manual
Page 113
Ge
ne
ra
l Ca
m
e
ra
Se
tu
p
95
The Setup Menu
Print date
Allows you to imprint the shooting date and time on
images at the time of shooting. The default setting is Off.
• The shooting date and time cannot be imprinted on
images in the following situations:
- When using Night portrait (when Hand-held is
selected), Night landscape (when Hand-held is
selected), Easy panorama, or 3D photography
scene mode
- When the continuous shooting setting (
A39) is set
to Pre-shooting cache, Continuous H: 120 fps, or
Continuous H: 60 fps.
- When shooting movies
Vibration reduction
Allows you to reduce blurring caused by camera shake
when shooting. The default setting is On.
• When using a tripod to stabilize the camera during
shooting, set this feature to Off to prevent this feature
from malfunctioning.
Motion detection
When set to Auto (default setting), if the camera detects
camera shake or subject movement at the time of
shooting, it automatically increases ISO sensitivity and
shutter speed to reduce blurring. The r indicator glows
green when the camera detects camera shake and
increases shutter speed.
• When using certain shooting modes or settings, motion
is not detected. In these cases the r indicator is not
displayed.
AF assist
When set to Auto (default setting), the AF-assist
illuminator (
A2) lights when shooting in dark
surroundings to help the camera focus.
• The illuminator has a range of about 1.9 m (6 ft 3 in.) at
the maximum wide-angle position and about 1.1 m (3
ft 7 in.) at the maximum telephoto position.
• Even if Auto is selected, the AF-assist illuminator may
not light depending on the position of the focus area or
the scene mode that is selected.
Digital zoom
When set to On (default setting), if you rotate the zoom
control to
g (i) when the camera is already zoomed in to
the maximum optical zoom position, the digital zoom is
activated (
Sound settings
Allows you to turn various camera sounds on and off.
• Camera operation sounds are disabled when using
certain modes, such as the Pet portrait scene mode.
Auto off
Allows you to set the amount of time that passes before
the monitor turns off to save power. The default setting is
1 min.
Option
Description
A