Wide-angle converter, X wide-angle converter, A149 – Nikon P6000 User Manual

Page 163: A149)

Advertising
background image

149

Shooting Options: The Shooting Menu

S

h

ooti

n

g

, Pl
ay

back

and S

e

tup M

e

nus

X Wide-angle Converter

This option is for use with the Step-down Ring Adapter UR-E21 (available separately
from Nikon) to attach the converter lens WC-E76 (available separately from Nikon)
listed below.
For more information on attaching the wide-angle converter, see “Wide-angle
Converter” (

A179) of this manual. For more information on using the wide-angle

converter, see the user’s manual provided with the wide-angle converter lens.

B

Notes on Attaching the Wide-angle Converter for Shooting

Set Wide-angle converter to On before shooting. Set Wide-angle converter to None when no

converter lens is attached.

The built-in flash is changed to W (off ) when Wide-angle converter is set to On. Use flash units

(

A180), available separately from Nikon) to shoot with the flash.

• Continuous flash cannot be used for Continuous (

A140).

Using the flash units (available separately from Nikon) to shoot at wide angle may cast shadows in

the pictures shot. Check the picture using the monitor after shooting. A wide panel is
recommended when shooting with the Speedlight SB-600, SB-800 or SB-900.

AF Assist cannot be used with Wide-angle converter is set to On.

D

More Information

See “Distortion Control/Converter Display” (

A148) for more information.

X

On

Use with the Wide-angle Converter WC-E76. When selecting this option, the camera
is zoomed out to the maximum wide-angle position.
Enjoy wide-angle shooting at a focal length of roughly 21mm (0.8 in.) (equivalent
with 35mm [135] picture angle) when Distortion control is set to Off and the
camera is zoomed out to the maximum wide-angle position. The full range of optical
zoom is available, however, by its very nature, best results are achieved with the
camera zoomed out to the maximum wide-angle position.
Digital zoom is not available.

k

None (default setting)

No modifications made to camera settings. Use when no converter lens is attached
(be sure to remove lens adapter ring).

Advertising