Nikon S6500 User Manual
Page 261
![background image](/manuals/431467/261/background.png)
F
9
Tech
ni
cal
Note
s
and I
n
dex
Date and time of recording
are not correct.
• If camera clock has not been set, “Date not set”
indicator flashes during shooting and movie
recording. Images and movies saved before clock is
set are dated “00/00/0000 00:00” or “01/01/2013
00:00” respectively. Set the correct time and date
from the Time zone and date option in the setup
menu.
• The camera clock is not as accurate as ordinary
watches or clocks. Periodically compare the time of
the camera clock with that of a more accurate
timepiece and reset as required.
No indicators displayed in
monitor.
Hide info is selected for Photo info in Monitor
settings in the setup menu.
Print date not available.
Time zone and date has not been set in the setup
menu.
Date not imprinted on
images even when Print
date is enabled.
• The current shooting mode is one that does not
support Print date.
• The date cannot be imprinted on movies.
Screen for setting time zone
and date is displayed when
camera is turned on.
Clock battery is exhausted; all settings were restored
to their default values.
Camera settings reset.
Monitor turns off, and the
power-on lamp flashes
quickly.
Battery temperature is high. Turn off camera and
allow battery to cool down before resuming use. After
the lamp flashes for three minutes, the camera will
turn off automatically. Pressing the power switch also
turns off the camera.
Camera becomes hot.
The camera may become hot when used for an
extended period of time to shoot movies or send
images using an Eye-Fi card, or when used in a hot
environment; this is not a malfunction.
–
Problem
Cause/Solution
A