Maintenance and care, Troubleshooting, Disposal – Indesit IP-751-S-(IX) User Manual

Page 24: Switching the appliance off, Cleaning the appliance, Gas tap maintenance

Advertising
background image

24

GB

• Do not close the glass cover (if present) when the gas

burners or electric hotplates are still hot.

• Do not leave the electric hotplate switched on without a

pan placed on it.

• Do not use unstable or deformed pans.

• The appliance should not be operated by people

(including children) with reduced physical, sensory or

mental capacities, by inexperienced individuals or by

anyone who is not familiar with the product. These

individuals should, at the very least, be supervised by

someone who assumes responsibility for their safety or

receive preliminary instructions relating to the operation

of the appliance.

• Do not let children play with the appliance.

• The appliance is not intended to be operated by means

of an external timer or separate remote-control system.

Disposal

• When disposing of packaging material: observe local

legislation so that the packaging may be reused.

• The European Directive 2012/19/EC on Waste

Electrical and Electronic Equipment (WEEE), requires

that old household electrical appliances must not

be disposed of in the normal unsorted municipal

waste stream. Old appliances must be collected

separately in order to optimise the recovery and

recycling of the materials they contain and reduce

the impact on human health and the environment.

The crossed out “wheeled bin” symbol on the product

reminds you of your obligation, that when you dispose

of the appliance it must be separately collected.

Consumers should contact their local authority or retailer

for information concerning the correct disposal of their

old appliance.

Maintenance and care

Switching the appliance off

Disconnect your appliance from the electricity supply before

carrying out any work on it.

Cleaning the appliance

! Do not use abrasive or corrosive detergents such as stain

removers, anti-rust products, powder detergents or sponges with

abrasive surfaces: these may scratch the surface beyond repair.

! Never use steam cleaners or pressure cleaners on the

appliance.

• It is usually enough to wash the hob with a damp sponge

and dry it with absorbent kitchen roll.

• The removable parts of the burners should be washed

frequently with warm water and soap and any burnt-on

substances removed.

• For hobs which ligth automatically, the terminal part of

the electronic instant lighting devices should be cleaned

frequently and the gas outlet holes should be checked

for blockages.

• Stainless steel can be marked by hard water that has

been left on the surface for a long time, or by aggressive

detergents containing phosphorus. After cleaning, rinse

and dry any remaining drops of water.

! The position of the central grid may be inverted. If this

happens, the spokes will appear particularly misaligned and

the intersection point will no longer be at the centre of the

burner. There is a hole on the grids at the side; this should

be aligned with the fixing point of the tab or hinge (if the glass

cover is fitted) located on the rear part of the hob (see figure).

OK

KO !

Gas tap maintenance

Over time, the taps may become jammed or difficult to turn.

If this happens, the tap must be replaced.

! This procedure must be performed by a qualified

technician authorised by the manufacturer.

Troubleshooting

It may happen that the appliance does not function properly

or at all. Before calling the service centre for assistance,

check if anything can be done. First, check to see that there

are no interruptions in the gas and electrical supplies, and,

in particular, that the gas valves for the mains are open.

The burner does not light or the flame is not even

around the burner.

Check whether:

• The gas holes on the burner are clogged.

• All the movable parts that make up the burner are

mounted correctly.

• There are draughts near the appliance.

The flame dies in models with a safety device.

Check to make sure that:

• You pressed the knob all the way in.

• You keep the knob pressed in long enough to activate

the safety device.

Advertising
This manual is related to the following products: