Asus INTEL TUSL2-C - Manual (Page 48)

ASUS TUSL2-C User’s Manual 48
4. BIOS SETUP
4. BIOS SETUP
Updating BIOS
7. The utility starts to program the new BIOS information into the Flash
ROM. The boot block is updated automatically only when necessary.
This minimizes the possibilities of boot problems in case of update
failures. When the programming is done, Flashed Successfully appears.
8. Follow the onscreen instructions to continue.
WARNING! If you encounter problems while updating the new BIOS, DO
NOT turn off the system because this may cause boot problems. Just repeat the
process, and if the problem still persists, load the original BIOS file you saved
to the boot disk. If the Flash Memory Writer utility is not able to successfully
update a complete BIOS file, the system may not boot. If this happens, call the
ASUS service center for support.