Asus WL-330 - Manual (Page 34)

3-8 ASUS Pocket Wireless Access Point (WL-330)
Configuration
If you are trying to connect to an
AP (Infrastructure), make sure
the MAC address of the ASUS
Pocket Wireless AP is included
in the AP authorization table.
2. Enter the SSID in the Network
Name field.
3. Select the network channel.
4. Select the network type. Choose
Infrastructure if you wish to
connect to an AP. Select Ad Hoc if
you wish to connect to another
wireless device.
Infrastructure mode
Icon Indications
The device is not connected to this access point.
The device is not connected to this WEP-encrypted access point.
The device is connected to this access point.
The device is not connected to this WEP-encrypted access point.
Table of Icon Indications
Ad-hoc mode
Icon Indications
The device is not connected to this wireless client.
The device is not connected to this WEP-encrypted wireless client.
The device is connected to this wireless client.
The device is connected to this WEP-encrypted wireless client.