Asus DSEB-D16/SAS - Manual (Page 64)

2-44 Chapter 2: Hardware information
12. Power supply SMBus connector (5-pin PSUSMB1)
This connector is for the power supply SMB cable, if your power supply
supports the SMBus function.
®
DSEB-D16 Series Power supply SMBus connector
PSUSMB1
+3.3V Remote Sense GND NC I2C_7_D
AT
A#
I2C_7_CLK
#
13. SSI power connectors (24-pin ATXPWR1, 8-pin ATX12V1, 4-pin ATX12V2)
These connectors are for SSI power supply plugs. The power supply plugs
are designed to fit these connectors in only one orientation. Find the proper
orientation and push down firmly until the connectors completely fit.
• For a fully configured system, we recommend that you use an SSI
12 V-compliant power supply unit (PSU) for LGA771-socket Intel ® Xeon
Dual Core processors (Bensley platform).
• DO NOT forget to connect the 24+8+4-pin power plugs; otherwise, the
system will not boot up.
• Use of a PSU with a higher power output is recommended when configuring
a system with more power consuming devices. The system may become
unstable or may not boot up if the power is inadequate.
• You must install a PSU with a higher power rating if you intend to install
additional devices.
®
DSEB-D16 Series ATX power connectors
8-pin
GND
12V2
GND
12V2
GND
12V1
GND
12V1
24-pin Power Connector
ATXPWR1
ATX12V1
4-pin
ATX12V2
+3 V
olts
+3 V
olts
Ground +5 V
olts
+5 V
olts
Ground Ground Power OK +5V Standby +12 V
olts
-5 V
olts
+5 V
olts
+3 V
olts
-12 V
olts
Ground Ground Ground PSON# Ground +5 V
olts
+12 V
olts
+3 V
olts
+5 V
olts
Ground
+12V DC GND
+12V DC GND