Doyon D20 - Manual (Page 3)

A 2
SHIPPING
For your safety, this equipment has been verified by qualified technicians and carefully crated before
shipment. The freight company assumes full responsibility concerning the delivery in good condition
of the equipment in accepting to transport it.
IMPORTANT
RECEPTION OF THE MERCHANDISE
Take care to verify that the received equipment is not damaged before signing the delivery receipt. If
a damage or a lost part is noticed, write it clearly on the receipt. If it is noticed after the carrier has
left, contact immediately the freight company in order that they do their inspection.
We do not assume the responsibility for damages or losses that may occur during transportation.
IN GENERAL
Take off the packaging material with care. Take off all the material used for packing and
accessories.
This equipment can be plugged on any network offering a protection of 15 amps.
INSTALLATION WARNINGS
INSTALLATION AND SERVICE
This equipment must be connected to the utility and electrically grounded in conformity to the
effective local regulations. If these are not established, this equipment must be connected according
to the National Electrical Code (NFPA 70-XX). This equipment has a male plug that meets those
requirements.