Vaddio IR Remote Commander - Manual

Installation and User Guide
Camera and Electronic Products for Integrators
© 2005 Vaddio 341-252 Rev. A
Vaddio™ IR Remote Commander
Enhanced IR Remote Controller
The Vaddio IR Remote Commander was designed to work with the Vaddio camera packages based on
the Vaddio HD-18, Sony® EVI-D70, EVI-D100 and BRC-300 Pan/Tilt/Zoom Cameras. The IR Remote is
compatible with the following list of Vaddio camera systems:
•
Vaddio ClearVIEW HD-18 Systems (Camera, WallVIEW and CCU Versions)
•
WallVIEW™ 70 PTZ, WallVIEW 100 PTZ, WallVIEW 300 PTZ
•
CeilingVIEW™ 70 PTZ and CeilingVIEW 70 PTZ HideAway
•
Vaddio EZCamera™ series Model 100 PTZ and Model 70 PTZ systems
•
Vaddio 100 PTZ and 70 PTZ Integrator’s camera kits
The Vaddio IR Remote Commander is also a 100% compatible replacement IR remote for the Sony PTZ Cameras
The information contained in this manual will help you install and operate you IR Remote
Commander. If these instructions are lost or misplaced, Vaddio keeps copies of Specifications,
SAVE THESE
INSTRUCTIONS
Figure 1:
Vaddio IR Remote Commander
Enhanced, ergonomically designed
and user-friendly handheld remote
control (Actual size)
Power On/off
(Green button)
Back Light
Compensation
On/off
Data Screen for BRC
Type Camera OSD
Camera Select
Three IR Frequencies
Standard Pan
Direction
Reverse Pan
Direction
Pan/Tilt controls
(burgundy buttons)
Pan/Tilt Reset Auto Focus
On/off
Zoom Speed
SLOW
(Lt. Gray button)
Zoom Speed
FAST
(Lt. Gray button)
Manual Focus Control
(Near- & Far+)
Preset Set
Press and hold,
touch Preset 1
thru 6 to set
preset
Preset Erase
6-Presets
Stored in the
Camera for
Recall
Camera Home Position