Vaddio WallVIEW CCU 300 Quick-Connect - Manual

Installation and User Guide
Camera and Electronic Products for Integrators
©2008 Vaddio - All Rights Reserved. Document Number 341-741 Rev B. Page 1 of 12
Q
UICK
-C
ONNECT
™ CCU 300
Vaddio™ Quick-Connect CCU for the Sony®
BRC-300 PTZ Camera
OVERVIEW
The Vaddio Quick-Connect CCU 300 (Figure 1) is built for use
with the Sony BRC-300 standard definition PTZ Camera.
The Quick-Connect CCU 300 allows the user to control the
color output of the camera’s image sensor, through both Red
and Blue Gain knobs, as well as Iris and Gain levels and
Aperture, to provide a higher quality image. The system uses
high speed differential signaling (HSDS), an active
transmission system that delivers low-loss, high-quality video
over CAT-5 cabling distances up to 500 feet. The Quick-
Connect CCU 300 system is capable of standard definition
(SD) resolutions in a variety of screen configurations to fit
most monitors. The BRC-300 is offered in either NTSC or
PAL formats.
The Quick-Connect CCU system also has many new features, including Tally illumination on the camera
which allows the presenter to know which camera is live, as well as Genlock delivered to the camera over
CAT-5. Other new features include the ability to store settings on two discrete Scene buttons, and buttons
for Auto White Balance, One Push White Balance and Auto Iris. Like all Vaddio Quick-Connect systems, the
Thin Profile Wall Mount and mounting hardware is included.
INTENDED USE
Before installing the Vaddio Quick-Connect CCU Camera System, please read the entire manual thoroughly.
All Vaddio camera systems are designed for use indoors. Outdoor operation is not recommended, has not
been tested, and could damage the camera and/or create a potentially unsafe operating condition. Use only
the Vaddio PowerRite power supply provided.
SAVE THESE INSTRUCTIONS
The information contained in this manual will help you install the Vaddio Quick-Connect CCU system. For
reference, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the website. These documents can be downloaded from
www.vaddio.com free of charge.
IMPORTANT SAFEGUARDS
Read and understand all instructions before using. Do not operate any electrical device if it has been
dropped or damaged. In this case, a Vaddio technician must examine the product before operating. To
reduce the risk of electric shock, do not immerse in water or other liquids and avoid extremely humid
conditions.
INFORMATION
For RS-232 control information, please see the full-length Technical Manual for the SONY BRC-300. This
manual can be found either on the Vaddio or Sony website. Vaddio has also prepared a number of
TechNotes, specifications and drawings designed to inform and educate integrators on the value and the
specific uses of Vaddio products.
Figure 1:
Quick-Connect CCU 300 System with
Camera (not included), Wall Mount and
EZIM CCU (behind camera)
Use only the power supply provided with the Vaddio Quick-Connect
products. Use of any unauthorized power supply will void any and all