DiGiCo SD Series Broadcast - Manual (Page 20)

DiGiCo SD Series Broadcast Options
1-20
1.2.13 Audio Follows Video .........................................................
Audio follows video functionality is achieved using incoming GPI’s to trigger Snapshots using the console’s Macro facility.
1) In the Master screen > Snapshot panel, create one snapshot for each camera that stores the relevant settings for the audio in that
location.
Adjust the console settings and press the Insert New button to create the Snapshot.
2) Program crossfades as required for each snapshot.
Select a snapshot from the list, press the Scope button and then press the Crossfades button.
Expand the Input Channels section of the Crossfades panel by pressing the down arrow next to the Input Channels entry.
Select the relevant channel controls (eg faders) and then touch the data entry area (secs/frames) at the bottom of the panel.
Now use the worksurface Touch Turn control to enter a crossfade time.
Crossfade times applied as required on individual faders
for each snapshot
Create one snapshot for each camera
3) Create one Macro for each snapshot that is to be triggered by the relevant GPI.
Open the Master screen > Setup > Macros panel and press the New button
In the Command Types column, select Snapshots panel.
In the Commands column select Fire Snapshot and then enter the relevant Snapshot number in the data column.
In the example below, a Macro named Camera 1 is triggered by GPI 1 and this in turn fires Snapshot 1
Trigger with GPI 1
Command to Fire Snapshot 1
Create a new Macro