DiGiCo Appendix 2 - SD Theatre - Manual (Page 9)

Appendix 2 - SD Theatre Operation
A2-9
Replacing Channel Settings in a Cue
Select the Channel Name Cell in a Cue, then press the Assign Button. The Channel Settings Assign Panel will open.
The Assign Panel lists all of the Channel Settings (Aliases) for the given channel. In this example, Channel 1 has two sets of settings
(Two Aliases).. Bob and Harry
By selecting Harry, you can replace all of the channel settings for Ch 1 in the given Cue (Cue 4 in this example) with Harry’s settings –
the 11 modules that make up Harry’s settings.
Options are available for selecting Channel Settings from this channel, or any other channel.
Expanded View
Touching the Channel Number at the top of the column expands the Channel to show the module components of the channel, for each
cue. The modules will be referred to as Module Snapshots.
Module snapshots can be assigned in the same way as Channel Settings; by touching the appropriate cell in the grid, and pressing the
Assign Button. This allows the selection of settings from a module of the same type (eg. EQ) from the same channel in another cue, or
from another channel in another cue.
Cue Number
Cue Name
Channel Name
Expanded Modules of Channel
A2.1.6 Creating Aliases .................................................................
Aliases are created from an Aliases Panel, accessed from Input Channel Setup Panels.
NOTE: Only unused Aliases can be deleted.