Vollrath Electric Hot Plate - Manual (Page 3)

C
ountertop
C
ooking
e
quipment
3
English
O
peratOr
’
s
M
anual
o
peration
WarninG
Burn hazard.
Do not touch hot food, liquid or heating surfaces
while equipment is heating or operating.
Hot surfaces and food can burn skin. Allow the hot surfaces to cool
before handling. Do not drop or spill liquid onto the heating surface
as it can spray, splatter or enter the equipment.
1. Turn thermostat control (C) to desired setting.
2. Cook or warm food products in desired manner.
3. At the end of each use turn thermostat control dial (C) to the lowest
number, unplug and allow equipment to cool.
c
leaning
To maintain the appearance and increase the service life, clean your
equipment daily.
WarninG
Electrical shock hazard.
Keep water and other liquids from entering the
inside of the equipment. Liquid inside the equipment
could cause an electrical shock.
Do not spray water or cleaning products. Liquid could contact the
electrical components and cause a short circuit or an electrical
shock. Do not use equipment if power cord is damaged or has been
modified.
note:
Do not clean the equipment with steel wool.
1. Allow the equipment to cool completely before cleaning.
2. Unplug the equipment.
note:
Do not immerse the cord, plug or equipment in water or
any other liquid.
3. Using a damp cloth, sponge dipped in soapy water to clean the
equipment.
4. Dry thoroughly after cleaning.
t
roUbleShooting
t
roubleshooting
C
hart
Problem it might be caused by Course of action
Pilot Light does not come on when
the temperature control is turned up.
The equipment is not plugged in. Plug equipment in.
Pilot Light malfunction. Replace Pilot Light.
Thermostat Control malfunction. Replace the Thermostat Control.
The light comes on, equipment does
not heat.
Thermostat Control malfunction. Replace Thermostat Control.
Heating Element malfunction. Replace Heating Element.
S
ervice and
r
epair
There are no user serviceable parts within this appliance. To avoid serious injury or damage, never attempt to repair the equipment or replace a damaged power
cord yourself. Do not send equipment directly to Vollrath. Please contact the qualified professional repair service listed below.
VOllraTh Technical service • 1-800-628-0832