Lenovo ThinkPad R61i User Manual
Page 66
The following table contains information about the file-migration commands. All
file migration commands are optional.
Table 23.
Command
Parameter
Description
Example
<FilesAndFolders> <run>
Starts the process of a
command. The
</run> parameter
ends the process of a
command.
To capture or apply file
migration, set the parameter
to True. Otherwise, set the
parameter to False or leave
it unspecified.
For example:
<FilesAndFolders>
<run>true</run>
</FilesAndFolders>
<Exclude_drives>
<Drive>
Specifies the drive
letter to exclude
drives from being
scanned.
For example:
<ExcludeDrives>
<Drive>D</Drive>
<Drive>E</Drive>
</ExcludeDrive>
<Inclusions>
<IncDescription>
<Description>
<DateCompare>
<Operand>
<Date>
v
<Description> is
the fully-qualified
filename. You can
use wildcard
character for both
filename and folder
name.
v
<DateCompare> is
an optional
parameter that you
can use to select
files based on the
date when they
were created.
– <Operand> is
either NEWER
or OLDER.
– <Date> is the
baseline date in
mm/dd/yyyy
format.
To search for matching files
in the specified directories.
For example:
Example 1
<Inclusions>
<IncDescription>
<Description>
c:\MyWorkFolder\ls
</Description>
</IncDescription>
</Inclusions>
Note:
To specify the folder
name, add .\. at the end of
the description.
58
Rescue and Recovery 4.21 Deployment Guide